The FD14120X4 is a 4-in-1 electronic speed controller recommended for 13–20-inch drone builds using 6S–14S LiPo batteries. It is rated for 100A continuous output and 250A peak output per channel, with a maximum operating voltage of 63V.
It supports DShot150/300/600, PWM and bidirectional DShot, with a UART interface and an onboard current sensor. No built-in BEC.
Technical Specifications
- Model: FD14120X4
- Recommended aircraft size: 13–20 inch
- Recommended battery: 6S–14S LiPo
- Maximum operating voltage: 63V
- Continuous output current: 100A × 4
- Peak output current: 250A × 4 (duration not specified)
- Maximum speed: 40,000 RPM (7 pole pairs)
- Throttle signals: DShot150/300/600, PWM
- Bidirectional DShot: Supported
- PWM frequency: 50–480Hz
- Communication interface: UART
- Onboard current sensor: Supported
- BEC: None
- Mounting hole spacing: 30.5 × 30.5mm
- Mounting holes: Ø4.00mm in the dimension drawing; specified as M4 in the parameter sheet
- Power cable specification: 10 AWG
- Capacitors: 330μF 100V × 4
- Weight: 76.9g
- Operating temperature: −20°C to 45°C
Protection Features
Stall, overvoltage, undervoltage, overtemperature power and throttle signal loss protection, with input signal detection.
Connection Reference
Connector: SM10B-SRSS-TB. Refer to the I/O pinout diagram for VCC, GND, CUR, TX and M1–M4, and the dimension drawing for installation.







