FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm
FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm

LKTOP

FD08100X4 100A 4-in-1 ESC – 3S–8S LiPo, 30.5 × 30.5mm

Sale price$37.99
Quantity:

The FD08100X4 is a 4-in-1 electronic speed controller for 11–15-inch drone builds using 3S–8S LiPo batteries. It is rated for 100A continuous current and 150A peak current per channel under strong airflow. Peak duration is not specified.

It supports bidirectional DShot, DShot150/300/600 and PWM, with a UART interface and an onboard current sensor. No built-in BEC.

Technical Specifications

  • Model: FD08100X4
  • Recommended aircraft size: 11–15 inch
  • Battery: 3S–8S LiPo
  • Maximum operating voltage: 35V
  • Continuous output current: 100A × 4, with strong airflow
  • Peak output current: 150A × 4, with strong airflow; duration not specified
  • Maximum speed: 40,000 RPM (7 pole pairs)
  • Throttle signals: DShot150/300/600, PWM
  • Bidirectional DShot: Supported
  • PWM frequency: 50–480Hz
  • Communication interface: UART
  • Onboard current sensor: Supported
  • BEC: None
  • Mounting hole spacing: 30.5 × 30.5mm
  • Mounting holes: Ø4.00mm, shown in the dimension drawing; specified as M4 in the parameter sheet
  • Power cable specification: 10 AWG
  • Capacitors: 330μF 100V × 3
  • Weight: 27.2g
  • Operating temperature: −20°C to 45°C

Protection Features

Stall, overvoltage, undervoltage, overtemperature power and throttle signal loss protection, with input signal detection.

Refer to the supplied dimension and connection diagrams for installation. Connection diagram is for reference only.